CavClear® Insulation System
Prevent Mortar from Making Contact with Insulation
Professionals know a properly functioning drainage system is the prerequisite for a masonry design to achieve maximum thermal efficiencies while reducing maintenance and repair costs. With the CavClear Insulation System, the mortar obstructions and droppings which impede drainage are completely prevented when installed full height.
The CavClear Insulation System features the CavClear® Masonry Mat factory bonded to rigid insulation. The Masonry Mat will not allow mortar to make contact with the insulation. If your goal is to provide a continuous drainage area behind brick or stone in an insulated masonry wall, look no further than the CavClear Insulation System.
CavClear Polyisocyanurate Insulation System & Weep Vents Guide Specs 6-18
Benefits of the CavClear® Insulation System
Superior Moisture Management
Fail-Safe Installation
No Transfers
Save Money - Short Term
Save Money - Short Term
One-Step Installation
The Details
Easy installation makes this product the ultimate air space maintenance and drainage system. Masons simply install insulation in typical manner as brickwork is completed.
- Install CavClear® Insulation System continuously in exterior masonry cavities during construction of the exterior wythe.
- Install horizontally between wall ties or joint reinforcement.
- Stagger end joints in adjacent rows.
- Butt adjacent pieces to moderate contact.
- Fit to perimiter construction and penetrations without voids.
- Type IV (extruded)
- Type X (expanded)
- Type 1, Class 2 (polyisocyanurate)
- Mineral Wool
Call for availability of additional insulation types.
3/8″, 1/2″, 3/4″, 1″, 1-1/4″ 1-3/4″ (12.7, 19.05, 25.4, 31.75, 44.45 mm)
Insulation Thickness:
As specified by Architect.
Dimensions:
16″ x 96″ (406.4 x 2,438.4 mm)
48″ x 96″ (1,219.2 x 22,438.4 mm)
Call for information on additional thickness and dimension options.
Downloads
